Liebherr Refrigerator 7082 499 00 User Manual

Operating instructions  
Page 14  
GB  
No-frost combined refrigerator-freezer  
7082 499-00  
CBNes 62 211  
 
GB  
Description of appliance and equipment  
1
2
3
4
5
6
7
8
9
bl  
bm  
Operating and control elements  
Adjustable door racks  
Adjustable storage shelves  
Bottle rack  
Type plate (behind the vegetable drawer on the left-hand side)  
BioFresh drawers  
Water filter  
Upper freezer drawer  
Lower freezer drawer  
IceMaker (in the interior of the upper freezer drawer)  
Ventilation grille. In this area, the exchange of air for the refrig-  
eration unit takes place. Never cover this grille or otherwise  
obstruct the air flow.  
Temperature and control display  
Water filter has to be changed  
Refrigerator temperature display  
Menu mode is activated  
Operating and control elements  
(for setting additional functions)  
The electronic control panel has the new "touch capacitance  
technology". Any function can be activated by touching the cor-  
responding icon.  
Freezer temperature display  
The exact contact point  
is between the symbol and its label  
Refrigerator  
operating icons  
Control  
icons  
Freezer  
operating icons  
Appliance control icons  
Freezer operating icons  
Refrigerator operating icons  
Power failure LED  
Temperature setting buttons  
Mute alarm (refrigerator and freezer)  
Dust filter LED  
Freezer ON/OFF  
SuperFrost  
SuperCool  
The dust filter in the appliance  
plinth must be cleaned.  
Refrigerator ON/OFF  
Temperature setting buttons  
SuperCooling LED  
Child lock LED  
Alarm LED  
IceMaker ON/OFF  
IceMaker ON LED  
SuperFrost LED  
15  
 
Water filter  
Installing the water filter  
Before switching on the appliance, install the water filter provided  
in the interior rear wall of the refrigerator compartment.  
This ensures good ice cube quality and keeps the water circuit  
free of solids such as sand.  
1. Remove the cover of the filter  
socket.  
Water filter  
location  
2. Insert the filter and turn it 90°  
clockwise.  
Replace the filter when the waterdrop  
symbol appears in the temperature  
display.  
Filters can be obtained from your dealer.  
Thedropsymbolmustbecancelledafter  
the filter has been changed. For detailed  
instructions see section entitled "Setup  
mode".  
Removing the water filter  
Caution!  
Turn the filter 90° anticlockwise  
and remove.  
To avoid the risk of bacteria growth, the water filter  
must be changed when the waterdrop symbol appears  
on the display!  
It is not necessary to switch off the water supply when removing  
or installing the water filter.  
Saving energy  
- Always ensure good ventilation. Do not cover ventilation open-  
ings or grille.  
- Always keep fan slits clear.  
- Avoidpositioningtheapplianceindirectsunlightornearcookers,  
radiators and similar sources of heat.  
- Theenergyconsumptiondependsontheinstallationconditions,  
e.g. the ambient temperature.  
- Keep the time the appliance is open to a minimum.  
- Store food logically.  
- Keep all food properly packed and covered so as to avoid its  
frosting up on the outside.  
- Alwaysallowhotfoodtocooltoroomtemperaturebeforeplacing  
in the appliance.  
- Defrost frozen food in the refrigerator.  
- If there is a thick layer of frost in the appliance: defrost the appli-  
ance.  
- Empty and switch off the refrigerator for longer vacation periods.  
- Use the vacation function for longer vacation periods.  
Accumulated dust increases the energy consumption:  
- Once a year, dust the refrigeration unit together with the metal  
grid of the heat exchanger at the back of the appliance.  
16  
 
GB  
Audible warning signal  
Switching the appliance on and off  
The appliance is equipped with an alarm function.  
You are advised to clean the appliance before switching it on for  
the first time (see "Cleaning").  
Audible door alarm:  
Do not load with frozen food until the temperature shows at least  
-18°C.The refrigerator and freezer compartments can be operated  
separately.  
If an appliance door is left open for more than 60 seconds,  
the audible warning signal will sound. Touch the ALARM  
icontocancelthealarm.Thealarmswitchesbacktostandby  
when the door is shut.  
Audible/visual temperature alarm:  
Switching on: Touch the On/Off icons (on left  
for refrigerator, on right for freezer) so that the  
temperature displays light up or flash.  
It sounds when it is not cold enough in the freezer compartment.  
The temperature display and the  
LED will also flash.  
The audible warning device is switched off by touching the  
ALARM icon.The temperature display will continue to flash  
until the cause of the alarm has been rectified.  
Switchingo:KeeptheOn/Oiconspressedforapprox.3seconds.  
This can be caused by:  
Setting the temperature  
• the freezer door being left open for a long time, allowing warm  
ambient air to enter;  
The appliance is pre-set for normal operation. We recommend  
temperatures of +5°C in the refrigerator and -18°C in the freezer.  
• a long power failure;  
• a fault in the appliance.  
To reduce the temperature: Touch the  
Down icon; on left for refrigerator and on  
right for freezer.  
In each case, make sure food has not thawed or perished.  
To increase the temperature: Touch the  
Up icon.  
Power failure/FrostControl display  
If the  
LED comes on on the control panel, this means that the  
- While you are entering the temperature, the set temperature will  
flash on the display.  
freezer temperature has risen too high during the last few hours or  
days due to a power failure.  
- When you touch the temperature setting icons for the first time,  
the most recent setting ("reference setting") is displayed.  
If you touch the ALARM icon now, the highest temperature  
registered during the power failure will be displayed. Check  
the quality of the food and its suitability for consumption in  
case it has become too warm or even defrosted.  
- You can change the settings in increments of 1°C by briefly touch-  
ing the icons again. If the icons are held, the temperature setting  
will change faster.  
- Approximately 5 seconds after the last touch, the display will  
automatically show the actual freezing or cooling temperature  
("actual setting").  
Thehighesttemperaturewillappearforappox.1minute.After  
that, the actual temperature in the freezer will re-appear.The  
display can be switched off by touching the ALARM icon.  
- You can change the temperatures  
in the refrigerator: between 9°C and 3°C and  
in the freezer: between -14°C and -28°C.  
SuperCool  
Touching the SuperCool icon switches the refrigerator compart-  
ment to maximum cooling. It is recommended particularly if you  
wish to cool large quantities of food, drinks, freshly baked goods  
or meals rapidly.  
Temperature display  
In normal operation, the following settings will be displayed:  
- the average refrigerator temperature and  
- the warmest frozen food temperature.  
Switching on: Touch the SuperCool icon briefly so that  
When starting up for the first time or when the  
appliance is warm, dashes will appear until  
the temperature reaches a level that can be  
displayed (below 0°C in the freezer).  
the LED  
comes on. The refrigerator temperature will  
drop to its lowest value.  
Note: The SuperCool function uses slightly more energy. After  
approximately six hours, however, the refrigerator switches back  
automatically to normal energy-saving operation. If required, the  
SuperCool function can be switched off sooner.  
The display will flash:  
- if you change the temperature or  
- if the temperature rises by several degrees, indicating cold loss,  
e.g. if you place fresh, "warm" food in the freezer or if you remove  
or re-pack frozen food the temperature may rise for a short time  
due to warm air flowing into the freezer.  
Switching off: Touch the SuperCool icon again until the LED  
goes out.  
IfF1toF5appearsinthedisplay,theappliancehasafault.Consultthe  
customerservicedepartmentindicatingthefaultnumberdisplayed.  
17  
 
Setup mode  
= Confirm water filter change  
The following functions can be activated in setup mode:  
= Child lock  
Afterthewaterfilterhasbeenchanged,thedrop  
symbol on the display must be reset.  
Resetting the drop symbol  
= Confirm water filter change  
= Ice maker vacation state  
• Activate setup mode by touching the  
SuperFrost icon for 5 seconds.  
= Water quantity for ice cube tray  
= Set BioFresh temperature  
= Display brightness  
• Touch the freezer compartment Down icon  
until appears in the display.  
• Touch the SuperFrost icon.  
- The display reads  
= Door gasket heating control  
=Confirm dust filter cleaning  
• Touch the SuperFrost icon again.  
Activating setup mode:  
• Touch the SuperFrost icon for five seconds.  
- The display reads  
• The drop symbol disappears.  
- The SuperFrost LED  
comes on for 5 seconds,  
- after 5 seconds will flash in the display.  
The appliance is in setup mode now.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
You can select the setup mode functions by touching  
the freezer compartment temperature setting icons.  
= Ice maker vacation state  
See section entitled "Ice maker".  
Note: In setup mode the display will flash continuously.  
Exiting setup mode:  
= Water quantity for ice cube tray  
• Touch the freezer compartment On/Off icon  
The appliance will change back to normal operation.  
If the produced ice cubes of the ice maker are too small, the inflow-  
ing water quantity can be adjusted.  
Adjusting the water quantity  
= Child lock  
• Activate setup mode by touching the SuperFrost icon for 5 sec-  
onds.  
The child lock is designed to protect the appliance from being  
switched off accidentally.  
• Touch the freezer compartment Down icon until  
appears in the display.  
Activating the child lock  
• Activate setup mode by touching  
• Touch the SuperFrost icon.  
the SuperFrost icon for 5 seconds.  
- The display reads  
- The display reads  
• Touch the freezer compartment Up icon once only so that E 4  
• Touch the SuperFrost icon.  
appears in the display.  
- The display reads  
Caution!  
• Touch the SuperFrost icon again.  
Do not increase for more than one step. If the adjusted value  
is too high, the ice cube tray of the ice maker could overflow.  
- The  
LED is lit and the child lock is activated.  
• Touch the SuperFrost icon again.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
• Exit setup mode by touching the  
freezer compartment On/Off icon.  
Deactivating the child lock  
Check the ice cube size within the next days. If the ice cubes are  
still too small, follow the steps above again.  
• Activate setup mode by touching  
the SuperFrost icon for 5 seconds.  
- The display reads  
• Touch the SuperFrost icon.  
- The display reads  
• Touch the SuperFrost icon again.  
- The  
LED goes out. The child lock is deactivated.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
18  
 
GB  
= Set BioFresh temperature  
= Door gasket heating control  
The temperature in the BioFresh drawers may be changed.  
Condensed water on the gasket of the refrigerator doors can be  
eliminated by activating the door gasket heating.  
Setting the BioFresh temperature  
Activating the door gasket heating  
• Activate setup mode by touching the SuperFrost icon for 5 sec-  
onds.  
• Activate setup mode by touching the SuperFrost icon for 5 sec-  
onds  
• Touch the freezer compartment Down icon until appears in  
the display.  
• Touch the freezer compartment Down icon until appears in  
the display.  
• Touch the SuperFrost icon.  
- The display reads  
• Touch the SuperFrost icon.  
- The display reads  
• Touch the freezer compartment Up/Down icons  
and set  
• Touch the freezer compartment  
Up/Down icons to select  
6 - 9 to increase the temperature (warmer),  
4 - 1 to reduce the temperature.  
= at slight condensation of the gasket,  
= at heavy condensation of the gasket,  
= heater off.  
CAUTION!  
• Touch the SuperFrost icon at the desired value.  
For values b4 - b1, the temperature in the drawers can  
drop to below 0°C. Food may freeze.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
• Touch the SuperFrost icon at the desired value.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
= Confirm dust filter cleaning  
Once the dust filter in the appliance plinth has been cleaned, the  
dust filter LED  
in the display must be cancelled.  
Cancelling the dust filter symbol  
= Display brightness  
Adjusting the display brightness  
• Activate setup mode by touching the SuperFrost icon for 5  
seconds.  
• Activate setup mode by touching the SuperFrost icon for 5 sec-  
• Touch the freezer compartment Down icon until appears in  
the display.  
onds.  
• Touch the freezer compartment Down icon until appears in  
• Touch the SuperFrost icon.  
the display.  
- The display reads  
• Touch the SuperFrost icon.  
- The display reads  
• Touch the SuperFrost icon.  
- The display reads  
• Touch the freezer compartment  
Up/Down icons to select  
• The dust filter symbol has been cancelled.  
0 = minimum to  
5 = maximum brightness.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
• Touch the SuperFrost icon at the desired value.  
• Exit setup mode by touching  
the freezer compartment On/Off icon.  
19  
 
When storing tall bottles, the  
bottom door rack must be moved  
further up.  
20  
 
GB  
Arranging food  
BioFresh compartment  
The BioFresh compartment enables you to keep food for up to  
3 times longer than in normal refrigerators.  
The constant temperature of just above 0°C and the adjustable  
humidity provide the ideal storage conditions for different types  
of food.  
Humidity selection  
(1) butter, cheese  
(2) eggs  
(3) bottles  
(4) frozen food, ice cubes  
(5) meat, sausage products, dairy products  
(6) baked goods, pre-cooked meals  
(7) fruit, vegetables, salads (for high humidity setting)  
meat, cold meats, dairy products (for low humidity setting)  
TheadjustablehumidityisexplainedintheBioFreshcompart-  
Dry  
Humid  
ment section.  
Small humidity symbol - slide  
control to left.  
High relative humidity of max.  
90%, large humidity symbol -  
slide control to right.  
Note  
This setting is suitable for dry  
or wrapped food like dairy  
products, meat, fish, cold  
meats.  
• Food which gives off or absorbs odours and flavours as well as  
liquids should always be stored covered or in closed containers.  
• High-percentage alcohols should be tightly sealed and stored  
upright.  
This setting is suitable for  
storing unwrapped food with  
a high moisture content such  
as salad, vegetables and fruit.  
Notes  
• Thehumidityinthecompartmentdependsonthemoisturecontent  
of the food in it, and the frequency with which the compartment  
is opened.  
• The fresher the product and the higher its quality, the longer it will  
keep.  
• Unwrapped animal and vegetable foods should be stored sepa-  
rately in the drawers. If there is not enough space for them to be  
stored separately, make sure that they are wrapped.Do not allow  
different types of meat to come into contact with one another but  
keepthempackagedseparatelysoastoavoidprematurebacterial  
spoilage.  
• The following products should not be stored in the BioFresh  
compartment: hard cheese, potatoes, cold-sensitive vegetables  
such as cucumbers, aubergines, avocadoes, semiripe tomatoes,  
zucchini, all cold-sensitive tropical fruits such as pineapples,  
bananas, grapefruit, melons, mangos, papayas, etc.  
21  
 
Freezer compartment description  
Notes on freezing and storage  
Both drawers can be used for freezing of food or storage of frozen  
• Always store identical food items together.  
food.  
• Packfoodwhichyouarefreezingyourselfinquantitiesappropriate  
to your household.To ensure that the food freezes right through,  
the following quantities should not be exceeded per package:  
fruit, vegetables: up to 1 kg, meat: up to 2.5 kg.  
• Pack frozen food in standard freezer bags or reuseable plastic,  
metal or aluminium containers.  
The ice cube bin in the upper drawer is intended for ice cubes only.  
If you need the whole upper drawer for freezing or storage, the ice  
cube bin can be removed.  
Important: The ice maker will not eject the ice cubes of its tray if  
• Do not allow fresh food which is to be frozen to come into contact  
with food already frozen. Always keep packs dry in order to avoid  
them sticking together.  
the bin has been removed.  
Ice cube bin  
Ice maker  
• Alwayswritethedateandcontentsonthepackanddonotexceed  
the stated storage time for the food.  
• Do not freeze bottles and cans which contain carbonated drinks  
as they might burst.  
• Onlytakeoutasmuchfoodasisimmediatelyrequiredforthawing.  
Use food which has been thawed in prepared meals as quickly  
as possible.  
Space for freezing and  
storage  
Frozen food can be thawed in the following ways:  
– in a fan oven,  
– in a microwave oven,  
– at room temperature,  
– in the refrigerator: the cold given off by the frozen food is used for  
cooling.  
Ice maker  
Safety instructions and warnings  
• Theicemakerisdesignedexclusivelytomakeicecubesinquanti-  
ties required by a household and may only be operated with water  
suitable for this purpose.  
• All repairs and work on the ice maker may only be carried out by  
customer service personnel or other trained personnel.  
Freezing  
Therstthreebatchesoficemustnotbeconsumedorused.  
This applies both to using the appliance for the first time  
and also to using it after it has not been used for a lengthy  
period of time. This ensures that the water supply is purged.  
Fresh food should be frozen to the core as rapidly as possible.  
Frozen food can also be given a cold boost.This is provided by the  
SuperFrost facility.  
The maximum amount of food (in  
kg) which can be frozen in 24 hours  
is shown on the type plate ("Freez-  
ing capacity"). This amount varies  
according to the model and climate  
rating.  
Themanufacturercannotacceptliabilityfordamagecaused  
by a faulty connection to the mains water supply.  
• The ice maker will only work if the combined refrigerator-freezer  
is connected to the electricity supply. It will only make ice cubes  
if the freezer compartment is operating.  
• Ensure that the drawer is fully closed, as the ice maker can oth-  
erwise not produce ice cubes.  
Freezing with SuperFrost  
Touch the SuperFrost icon  
on.  
briefly so that the  
LED comes  
• For small amounts of frozen food switch on SuperFrost 6 hours  
beforehand. For the maximum amount (see freezing capacity on  
the type plate) you will need to switch it on 24 hours beforehand.  
• Then place the fresh food inside the freezer.  
- The SuperFrost function switches off automatically.Depending  
on the quantity of food placed in the freezer, this will normally  
be between 30 and max. 65 hours. The freezing process is now  
complete, the SuperFrost LED will go out.  
You should not switch on the SuperFrost function:  
- when placing frozen food in the freezer;  
- when freezing up to approx. 2 kg fresh food daily.  
22  
 
GB  
Bleeding the ice maker  
To ensure that the ice maker works properly, the water supply line  
must be bled.  
Ice maker vacation state  
In case of longer vacations, the ice cube tray should be emptied.  
• Touch the IceMaker icon  
comes on.  
• Open the top freezer drawer.  
so that the IceMaker LED  
By setting the ice maker into the  
vacation state, the tray will  
rotate down and no water  
remains in the tray.  
• Press the ON/OFF button on the ice  
makerhousingforapprox.3seconds.  
TheLEDabovethebuttonstartsflash-  
ing.  
The freezer drawer must be  
left open so that the surface  
of the tray dries up and no mould  
or unpleasant odours can occur.  
• Press the button again briefly. The  
LED flashes more quickly.  
• Closethefreezerdrawerimmediately.  
The water supply valve opens for 25 seconds and pumps all the  
air out of the water supply system.  
• Then the ice cube tray of the ice maker must be completely  
emptied. See the section Activating the ice maker vacation  
state.  
Activating the ice maker vacation state  
Be sure the upper freezer drawer is com-  
pletely closed and the ice cube bin is  
installed correctly.  
• Activate setup mode by touching the Su-  
• Finally, clean the ice cube bin.  
Ice cube bin  
perFrost icon for 5 seconds.  
Ice cube bin  
TouchthefreezercompartmentDownicon  
until appears in the display.  
Touch the SuperFrost icon.  
Switching the ice maker on  
- The display reads  
• Touch the IceMaker icon  
so that the IceMaker LED  
comes on.  
or  
After you start the ice maker for the first time, it may take up to  
24 hours before the first ice cubes are ready.  
depending on whether the ice maker is switched  
on or off.  
The production capacity depends on the temperature inside the  
freezer compartment. The lower the temperature, the more ice  
cubes can be produced over a period of time.  
The ice cubes fall out of the ice maker into the ice cube bin. When  
the ice reaches a certain level in the bin, the appliance stops pro-  
ducing ice automatically.  
Touch the freezer compartment Down icon.  
- The display reads  
Touch the SuperFrost icon.  
Switching the ice maker off  
- The digit flashes.  
If you do not need any ice cubes, the ice maker can be switched  
off independently of the freezer compartment.  
The ice cube tray rotates down.  
When the interior temperature appears in the display, the tray is in  
the down position and the ice maker is switched off automatically.  
• Touch the IceMaker icon  
so that the IceMaker LED  
goes out.  
The ice maker can also be  
switched on and off using the  
ON/OFF button at the ice maker  
housing.  
Press the button for approxi-  
mately 1 second.  
23  
 
Defrosting  
Cleaning the dust filter  
1. Disconnecttheappliancefromthemains.  
2. Pullthebottomfreezerdrawerrightout.  
3. Unscrew the ventilation grille.  
Refrigerator compartment  
Therefrigeratorcompartmentdefrostsautomatically.Thewaterthat  
forms on the rear wall drains into a reservoir at the back of the ap-  
plianceandevaporatesautomaticallythroughthecompressorheat.  
Freezer compartment  
The NoFrost system automatically defrosts the appliance.  
Any moisture arising collects on the evaporator and freezes, and  
is periodically defrosted and evaporated.  
Cleaning  
Before cleaning always switch off the appliance. Pull out the  
mains plug or switch off or unscrew the fuse.  
4. Pushdownthebuttononthefilter,tiltthefilterforwards  
and remove.  
Clean the inside, equipment and outer walls with lukewarm water  
and a little detergent. Do not use abrasive or acid cleaners or  
chemical solvents.  
The dust filter can be washed in a dish-  
washer or by hand using water and  
detergent.  
Do not use steam cleaners because of the risk of injury and  
damage.  
• Ensure that no cleaning water penetrates into the electrical com-  
ponents or ventilation grille.  
• Dry all parts well with a cloth.  
• Do not damage or remove the type plate on the inside of the ap-  
pliance. It is very important for servicing purposes.  
• Use a commercially available stainless-steel cleaning agent for  
5. Dry the filter and then, in reverse order, replace it.  
6. Re-attach the ventilation grille.  
stainless-steel appliances.  
- Inordertoachievebestpossibleprotection,applyastainless-steel  
care agent uniformly in grinding direction after cleaning. Points  
which are darker at the start and a more intensive coloration of  
the stainless-steel surface are normal.  
7. Cancel the dust filter LED  
in the display. See Setup mode,  
= Confirm dust filter cleaning.  
- Donotuseabrasivespongesorscourers,donotuseconcentrated  
cleaning agents and never use cleaning agents containing sand,  
chloride or acid or chemical solvents, as these would damage the  
surfaces and could cause corrosion.  
24  
 
GB  
Malfunctions  
Your appliance is designed and manufactured for a lengthy, reliable  
operating life with no malfunctions. If a malfunction nonetheless  
occurs during operation, check whether it is due to an operating  
error. Please note that even during the warranty period the result-  
ant servicing costs in this case will have to be borne by the owner.  
You may be able to rectify the following faults by checking  
the possible causes yourself:  
Appliance does not function:  
– Is the appliance switched on?  
– Is the plug correctly fitted in the mains socket?  
– Is the fuse intact?  
Loud running noise:  
– Is the appliance set up firmly on the floor?  
– Does the appliance cause nearby items of furniture or objects to  
vibrate? Please note that noises caused by the refrigerant circuit  
cannot be avoided.  
The temperature is not cold enough:  
– Isthetemperaturesettingcorrect(see"Settingthetemperature")?  
– Have excessive amounts of fresh food been placed in the appli-  
ance?  
– Doestheseparatelyinstalledthermometershowthecorrectread-  
ing?  
– Is the ventilation system working properly?  
– Is the appliance set up too close to a heat source?  
If none of the above causes apply  
andyoucannotrectifythefaultyour-  
self, contact the nearest customer  
service department stating the type  
designation , index and appli-  
ance number as indicated on the  
type plate.The type plate is located  
insidetheapplianceontheleft-hand  
side (refrigerator).  
Shutting your appliance down  
If your appliance is to be shut down for any length of time, switch  
it off and disconnect the plug or switch off or unscrew the fuse.  
Clean the appliance and leave the door open in order to prevent  
unpleasant smells.  
The appliance complies with the relevant safety regulations and  
EC Directives 2004/108/EC and 2006/95/EC.  
All types and models are subject to continuous improvement and  
themanufacturerthereforereservestherighttomakemodifications  
to the shape, equipment and technology.  
25  
 

Leica Microscope Magnifier L2 User Manual
Liebert Power Supply UPStation GX User Manual
Lightolier Work Light SS T5 Strip User Manual
Lowrance electronic GPS Receiver X102C User Manual
Mackie Musical Instrument 1402 VLZ3 User Manual
Makita Saw 51778 User Manual
Manitowoc Ice Ice Maker S1470C User Manual
Mantis Log Splitter Swift Split User Manual
Mellerware Electric Grill 27005 User Manual
Memorex Telephone MPH692 User Manual