Mazda Remote Starter MPV Miata User Manual

Installation  
Platform # 05 Firmware: PKM2  
Description: Mazda Transponder Interface: MPV/Miata (PKM2) NO KEY REQUIRED  
Manual (1\1 Page)  
Functions: Data Transponder Interface: Override OEM Transponder Immobilizer Via Data  
Downloadable Firmware for Platform #05: PKG3,PKG8,PKH1, PKH2,PKH3,PKH4,PKHY1,PKM2,PKN2,PKT2  
for the firmware that is flashed to the platform you are using.  
Section A  
See Wire Connection Guide for detailed information regarding wire functionality  
Internet  
.C.  
P
Option A  
Firmware Upgrades  
USB Cable  
USB Adaptor  
4 PIN DATA TO DATA (D2D) CABLE (OPTIONAL ACCESSORY)  
Option B - Data 2 Data Connection to RCS Data Port  
CLEARCODE VIP  
DATA PORT  
(-)  
Brown  
Ground When Running  
INPUT  
UPGRADEABLE  
OVERRIDE OEM  
TRANSPONDER  
IMMOBILIZER  
VIA DATA  
Green  
Blue  
N/C  
N/C  
(+)  
N/C  
OUTPUT  
Ignition ECM Side  
Violet/White  
Violet  
Data (Key Side)  
Data (ECM Side)  
DATA  
DATA  
Key  
Side  
(+)  
(+)  
Pink/White  
Ignition (Key Side)  
Ignition (ECM Side)  
INPUT  
OUTPUT  
Pink  
MAZDA  
IMMOBILIZER  
MODULE  
B
B
N/C  
N/C  
(+)  
Orange  
Red  
N/C  
INPUT  
(+)12 Volt Constant  
LED  
ECM  
Side  
(-)  
INPUT  
Black  
Chassis Ground  
Immobilizer module is located  
under dash on the driver side  
to the right of the steering  
column.  
Programming  
button  
Section B  
WIRE GUIDE: CONNECTIONS  
10 PIN HARNESS  
D2D = Optional use of 4 Pin Data to Data (D2D) cable will replace the analogue wire (w2w) connection  
(-)  
/(+)  
WIRE  
COLOR  
PIN#  
I/O  
STATUS  
Connect  
Location  
D2D  
w2w  
SPECIFIC WIRE CONNECTION LOCATION  
RCS Ground When Running output of remote starter  
ACTIVATION and/or FUNCTIONALITY  
Immobilizer Bypass Via Data  
(-)  
1
Brown  
D2D  
w2w  
Input  
N/C  
N/C  
N/C  
(+)  
N/C  
N/C  
N/C  
2
Green  
Blue  
Ignition Power Source Supply  
w2w Output  
Connect in parallel to Pink wire of 10 PIN Harness  
3
Vehicle  
Connect to Blue/Black Vehicle Data wire (Key Side)  
*Data wire in the Miata is Red/Black  
Violet/  
White  
w2w  
Data  
Vehicle  
Vehicle  
4
5
Data Commands from Module to Vehicle  
w2w  
Data  
Connect to Blue/Black Vehicle Data wire (ECM Side) Data Commands from Module to Vehicle  
*Data wire in the Miata is Red/Black  
Violet  
(+)  
(+)  
Ignition Power Source Return  
Pink/  
White  
Connect to Black/White Vehicle Ignition wire (Key Side)  
Vehicle  
Vehicle  
6
7
w2w  
w2w  
Input  
Ignition Power Source Supply  
Once connected in parallel to Blue wire of 10 PIN  
harness, connect to Black/White Vehicle Ignition wire  
(ECM Side)  
Output  
Pink  
N/C  
N/C  
N/C  
(+)  
N/C  
N/C  
8
9
N/C  
Orange  
Red  
D2D  
w2w  
Input  
Vehicle Constant (+) 12 Volt Source  
Power Source  
(-)  
Connect to Black or Black/Orange Vehicle Ground wire  
10  
Black  
D2D  
w2w  
Vehicle  
Input  
Ground Source  
Legend  
RCS = Remote Control System  
N/C = No Connection  
N/A = Not Applicable W2W= analogue wire to wire D2D= data 2 data  
DATA to DATA PORT (D2D): Blue connector of D2D Cable plugs into the upgradeable vehicle interface module.  
OPTION A: - D2D Port used to connect to USB Bootloader adaptor & computer to download & flash vehicle interface firmware.  
OPTION B: - D2D Port used to connect to the data port of a remote control system equipped with ClearCode Vehicle Interface Protocol.  
Remote control systems designed with ClearCode VIP can securely communicate via the D2D cable to transmit & receive data commands which initiate  
specific vehicle function such as doorlocks & immobilizer override and /or request information from the vehicle such as status of entry points (doors) or  
ambiant température, diesel glow plug etc… ClearCode VIP represents the doorway to vehicle integration...As an enhanced security feature, this upgradeable  
vehicle interface module automatically detects when the Vehicle Interface Protocol is present and deactivates the analogue override input wire (brown wire)  
ensuring that this module can only be activated by an authorized user.  
Section C  
VEHICLE PROGRAMMING  
1) Once module has been properly connected, press and hold programming button then turn key to IGNITION position, LED should come on solid.  
2) Start vehicle by key, LED will begin to flash. Module is now programmed.  
*To RESET, press and hold button and plug in module. LED comes on. When LED goes off, release button.  
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide.  
DISCLAIMER  
: Under no circumstances shall  
representative or  
the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any  
any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product are liable for consequential damages  
connection with this product neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.  
sustained in  
 

Land Pride Automobile Parts 4200 4400 NT ST User Manual
Land Pride Lawn Mower 315 507P User Manual
Lenmar Enterprises Car Stereo System NVC250 User Manual
Lenovo Webcam G770 User Manual
LG Electronics Cell Phone 221C User Manual
LG Electronics DVD VCR Combo RCT699H User Manual
Maytag Dishwasher 6 915928 A User Manual
Melissa Kitchen Grill 643 049 User Manual
Melissa Microwave Oven 253 023 User Manual
Mellerware Hot Beverage Maker 21205G User Manual