DSP3300
User Guide
3
EN
DSP3300 User Guide
Unpacking
The DSP3300 is supplied with the following accessories:
If either of these items are missing please contact your dealer.
• Power cord.
• This manual.
NOTE: You should retain the packaging in case you need to
transport the units.
Connections
Digital connections
The following diagram gives details of the connections on
the base of the speaker:
Use this connection
To connect to this
SpeakerLink input
The SpeakerLink output of a Meridian
Sooloos component, Digital Surround
Controller, or Audio Core 200, or the
SpeakerLink output of another DSP
loudspeaker.
Fuse
SpeakerLink output
The SpeakerLink input of a second
DSP3300 digital speaker, when daisy-
chaining the speakers.
Power
Channel selector
Miscellaneous
Switch
Description
SpeakerLink output
SpeakerLink input
Digital Channel Selector
Set to L/C to use the speaker as a left
or centre channel speaker. Set to R
to use the speaker as a right channel
speaker.
Standby indicator
The status of the DSP3300 is shown by a green standby
indicator on the back panel.
Status
Description
Dimly illuminated
Brightly illuminated
Speaker in standby
Speaker operating
The speakers are switched on or into standby as appropriate via
the SpeakerLink connections by the Meridian system they are
connected to.
ꢁ
DSP3300 User Guide
EN
Applications
To connect a pair of DSP3300s to a Meridian
Audio Core 200
• Connect the upper SpeakerLink output on the Audio Core
200 to the Slave DSP3300, using a Meridian SpeakerLink
lead.
The DSP3300s are ideal for a compact Audio Core 200 based
system.
• Make sure the Channel selector is set to the L/C position on
the back of the left speaker and to the R position on the back
of the right speaker.
• Connect the lower SpeakerLink output on the Audio Core
200 to the Master DSP3300, using a Meridian SpeakerLink
lead.
Meridian Audio Core 200
DSP3300 – Master
DSP3300 – Slave
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
SPEAKERLINK
IN OUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
ꢂ
EN
DSP3300 User Guide
• Set the Channel selector on the front and rear left speakers
to the L/C position, and on the front and rear right speakers
to the R position.
To use a DSP3300 as the centre speaker in a
Meridian Digital Theatre
The DSP3300 is ideal as the centre loudspeaker in a Meridian
Digital Theatre, in combination with DSP3200 or DSP3300
front and rear loudspeakers and a DSW subwoofer. The system
can be controlled by a Meridian Digital Surround Controller such
as the G68. The following diagram shows how to connect the
speakers using “home run” wiring.
• Set the Channel selector on the centre speaker to the L/C
position, and on the DSW subwoofer to the 2 position.
Alternatively you can connect the speakers using “daisy chain”
wiring: connect the front and rear L speakers to the G68,
and then link each pair of speakers together by connecting
the output from the L speaker to the input of the R speaker.
Likewise connect the centre speaker to the G68, and then
link the output from the centre speaker to the input of the
subwoofer.
• Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital speaker (here the front left
speaker), using a Meridian SpeakerLink lead.
• Connect the appropriate SpeakerLink outputs on the G68
to each of the remaining speakers and the subwoofer, using
Meridian SpeakerLink leads.
Note that if the system includes DSP loudspeakers with
displays, such as the DSP5200, one of them must be set up as
the master in the system.
Meridian Surround Controller
DSP3200 – Rear L
DSP3200 – Rear R
MERIDIAN
MERIDIAN
MERIDIAN
SPEAKERLINK
SPEAKERLINK
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink
SpeakerLink
DSP3200 – Front R
DSP3200 – Front L (Master)
DSP3300 – Centre
DSW – Subwoofer
MERIDIAN
MERIDIAN
MERIDIAN
MERIDIAN
SPEAKERLINK
SPEAKERLINK
SPEAKERLINK
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink
SpeakerLink
SpeakerLink
SpeakerLink
ꢃ
DSP3300 User Guide
EN
• Make sure the WAN/Internet port on the Router is connected
to the rest of your network, or to your Cable/DSL Modem.
To create a stand-alone Sooloos system
The DSP3300s can be connected directly to a Meridian Media
Core 200 to make an ideal compact Sooloos system.
• Connect the SpeakerLink output on the Media Core 200 to
the Master DSP3300 SpeakerLink input, using a Meridian
SpeakerLink lead.
You can browse and control music on the system using the
Sooloos application on an iPad, iPhone, or iPod Touch, or the
Control:PC/Control:Mac application on a computer.
• Connect the SpeakerLink output from the Master DSP3300
to the SpeakerLink input of the Slave DSP3300, using a
Meridian SpeakerLink lead.
• Connect the Network socket on the Media Core 200 to one
of the LAN network connections on your Router, using a
CAT5 cable.
For information on configuring your Media Core 200 please
refer to the Media Core 200 User Guide.
Media Core 200
NETWORK
DSP3300 – Master
DSP3300 – Slave
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
SPEAKERLINK
OUT
Router
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
Internet
SpeakerLink lead
ꢄ
EN
DSP3300 User Guide
|